![dell perc h200 ubuntu dell perc h200 ubuntu](https://www.abort-retry-fail.com/wp-content/uploads/2018/09/sas2ircu_LIST.png)
System is an up-to-date Ubuntu 14.04 圆4, Kernel 3.13.
![dell perc h200 ubuntu dell perc h200 ubuntu](https://res.cloudinary.com/canonical/image/fetch/f_auto,q_auto,fl_sanitize,c_fill,w_720/https://ubuntu.com/wp-content/uploads/2e4c/dell-xps-2004.jpg)
Jumper removed = drives detected, I could have saved a heap of time by being a bit more thorough and less hasty jumping to conclusions.Īnyway, back on topic for this thread - The Fujitsu D2607 was the cheapers SAS2008 card I could find on eBay by a decent margin (the M1015 is not much cheaper than a SAS3008 card I bought). Hi all, weve exchanged the disks of an R210 and added 2 1TB Seagate Constellation ES.3 (ST1000NM0033) SATA disks running in combination with a PERC H200 in RAID1 mode. Its the solo server on the network and used as a fileserver only and is configured as a DC/AD, with 14 client computers. The Motherboard seems to have no UEFI, just a BIOS.
#Dell perc h200 ubuntu windows#
I had originally thought it was a SATA150 limitation but discounted it as the WD Raptor was working at this speed, with this in mind I checked over the drives again and the "force SATA150/300" jumper was in place at 150 for all that't weren't detecting on the 3x HBAs. Hey chaps, Running a PowerEdge T110 II, 8GB RAM, Perc H200 adaptor with 2 x 512TB SAS Drives in RAID1, Windows Server 2012. So, I recently bought a Dell Perc H310 RAID controller to put in a Fujitsu Esprimo P700 E85+ Computer running Ubuntu Server 18.04.1 LTS. I've just tried the drives on a SAS3008 controller (M1215 flashed to 9300-8i P14 IT-mode) and the drives wouldn't show either. no issues with P20.00.07 FW, only user error! Click to expand.Followup - no such issues experienced by others according to this thread which includes one the few flashing guides across the internet for both the D2607 & H310 cards.įrom further troubleshooting and as per my latest post in that thread, it appears that the 9211-8i IT mode 20.00.07.00 FW cannot detect some drives which work fine in other PCs and were detected by the cards with their OEM IR mode FW.